EasyManua.ls Logo

Merax A012C - Decommissioning; Storage Guidelines; Disposal Information

Merax A012C
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8. DECOMMISSIONING
8.1 STORAGE
Long-Term Storage - If you will not be using the unit for an extended period of me (more than a
few weeks) it is best to clean the unit and dry it out completely. Please store the unit per the
following steps:
1. Unplug the unit and remove exhaust hose and window kit store with the unit.
2. Drain the remaining water from the unit.
3. Clean the filter and let the filter dry completely in a shaded area.
4. Collect the power cord at the water tank.
5. Re-install the filter at its posion.
6. The unit must be kept in upright posion when in storage.
7. Preserving the machine in venlang, dry, non- corrosive gas and safe place indoor.
ATTENTION:
The evaporator inside the machine has to be dried out before the unit is packed to avoid component
damage and molds. Unplug the unit and place it in a dry open area for days to dry it out. Another
way to dry the unit is turn on the machine, adjust it to low-wind venlaon mode, and maintain
this state unl the drainage pipe becomes dry, so as to keep the inside of the body in a dry state
and prevent it from mildewing.
8.2 DISPOSAL
WARNING!!!
Releasing refrigerant into atmosphere is strictly forbidden!
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collecon facilies. Contact your local government for informaon regarding the
collecon systems available. If electrical appliances are disposed of in landlls or
dumps, hazardous substances can leak into the groundwater and get into the food
chain, damaging your health and well-being.

41