Operating cruise control
#
Press the rocker switch on the steering
wheel control panel up or down to the
desired position.
Activating cruise control
#
Select M with the right rocker switch.
Activating cruise control
#
Press rocker switch 1 up M or down
N.
The current speed is stored and maintained
by the vehicle.
or
#
Select J with the left rocker switch.
The last stored speed is called up and main‐
tained by the vehicle.
If the last stored speed has previously been
deleted, the current vehicle speed is stored.
%
When you switch off the vehicle, the last
speed stored is cleared.
Increasing/decreasing the stored speed
#
1 mph (1 km/h): press rocker switch 1 up
M or down N to the pressure point.
or
#
5 mph (10 km/h): press rocker switch 1 up
M or down N beyond the pressure
point.
or
#
Accelerate the vehicle to the desired speed
and press rocker switch 1 up M.
Adopting a detected speed
#
Activate cruise control or the variable limiter.
#
If a traffic sign has been detected and is dis‐
played in the instrument cluster: select J
with the left rocker switch.
The maximum permissible speed shown by
the traffic sign is stored and the vehicle
maintains or does not exceed this speed.
Deactivating cruise control
#
Select O with the left rocker switch.
Deactivating cruise control
#
Select N with the right rocker switch.
%
If you brake, deactivate ESP
®
or if ESP
®
intervenes, cruise control is deactivated.
DSR (Downhill Speed Regulation)
Function of DSR (Downhill Speed Regulation)
DSR is an aid to assist you when driving down‐
hill. It keeps the speed of travel at the selected
target speed. The steeper the downhill gradient,
the greater the DSR braking effect on the vehi‐
cle. On flat stretches of road and uphill gradi‐
Driving and parking
183
To Next Page
Loading...
Need help?
General
