O
For certain child restraint systems in weight
group II or III, there may be restrictions on
the maximum size setting, e.g. due to possi‐
ble contact with the roof.
O
The child restraint system must not be
installed between the roof and the seat
cushion and/or be installed facing the
wrong direction. Where possible, adjust the
seat cushion inclination accordingly.
O
The child restraint system must not be put
under strain by the head restraint. Adjust
the head restraints accordingly.
#
Before every journey, make sure that the
LATCH-type (ISOFIX) child restraint system is
correctly engaged in both mounting brackets
in the vehicle.
*
NOTE Damage to the seat belt for the
center seat during installation of the
child restraint system
#
Make sure that the seat belt is not trap‐
ped.
Rear bench seat (second row of seats):
#
Attach the LATCH-type (ISOFIX) child
restraint system to both LATCH-type (ISOFIX)
mounting brackets 1.
Vehicles with a third row of seats:
#
Attach the LATCH-type (ISOFIX) child
restraint system to both LATCH-type (ISOFIX)
mounting brackets 1.
Occupant safety
57
To Next Page
Loading...
Need help?
General
