#
Fold up luggage compartment partition 1.
Make sure that luggage compartment partition
1 is always folded down when the vehicle is
moving.
Folding down the luggage compartment parti‐
tion
#
Fold down luggage compartment partition 1
until it engages.
Luggage compartment partition 1 is locked.
Removing the luggage compartment partition
#
Fold up luggage compartment partition 1.
#
Swing levers 2 inwards.
Luggage compartment partition 1 is
released.
#
Remove luggage compartment partition 1.
Fitting the luggage compartment partition
If possible, fit luggage compartment partition 1
with the help of another person.
#
Place luggage compartment partition 1 into
the vehicle at an angle.
#
Rotate luggage compartment partition 1 in
the vehicle and insert it into the guide rails.
The guide rails have triangular markings at the
place to be inserted which must be at the same
height as levers 2.
#
Swing levers 2 outwards.
Luggage compartment partition 1 is locked.
#
Fold luggage compartment partition 1
down.
Carrier systems
Notes on carrier systems
&
WARNING Risk of accident due to
exceeding the maximum roof load
The vehicle centre of gravity and the usual
driving characteristics as well as the steering
and braking characteristics alter.
If you exceed the maximum roof load, the
driving characteristics, as well as steering and
braking, will be greatly impaired.
#
Never exceed the maximum roof load
and adjust your driving style.
You can find information on the maximum roof
load under "Lashing points and carrier systems"
(/ page 345).
Transporting
281