17
Controls in detail
Taxi roof sign illumination
2
Press the upper section of pushbutton
switch 1.
Indicator lamp 2 lights up and the taxi
roof sign illumination can be switched
on via the taximeter.
On vehicles with a multifunction dis-
play (High-Line)*, indicator 3 also
appears.
Indicator lamp 2 and display 3 do
not light up when the taximeter is in
counting mode or there is a malfunc-
tion ( page 20).
3 Roof sign illumination status
Press the upper section of pushbutton
switch 1.
Indicator lamp 2 and, if appropriate,
indicator 3 go out. The taxi roof sign
illumination is switched off.
Activating power supply
i
If the vehicle battery voltage falls below
11.2 V, the taxi roof sign illumination
switches off automatically.
Switching off
To Next Page
Loading...
Need help?
General
