Section 5 - Maintenance
90-865253073 DECEMBER 2007 Page 65
Lubrication
Throttle Cable
1. Lubricate the pivot points and the guide contact surfaces.
a
b
a
5577
a - Pivot points b - Guide contact surfaces
Tube Ref. No. Description Where Used Part No.
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
Throttle cable pivot points &
guide contact surfaces
92‑883725K01
Transmission Linkage
IMPORTANT: The poppet ball must be centered in the detent hole for each F‑N‑R position.
1. Lubricate the detent ball and the holes in the shift lever.
a
5934
In‑Line Transmission
Tube Ref. No. Description Where Used Part No.
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
Detent ball and shift lever
holes
92‑883725K01