33
INSTALLATION
Check the appliance is electrically safe when you have nished.
Removing the Side Panels
1. Loosen one screw in the vent (Fig. 10.3).
2. Push forward the side panel so that it moves away from
the ue vent and the retaining washer (Fig. 10.4).
3. Inside the top of the side panel top are two tabs. Move
the side panel up and away from the cooker (Fig. 10.5).
4. Note: If a side panel is loose, t one of the extra gaskets
to the inner face of the front bracket locating tabs (Fig.
10.5) and ret.
Fig. 10.3
Fig. 10.4
Fig. 10.5
Side panel bracket
Flue Vent
Side Panel
Nylon Retaining
washer
To Next Page
Loading...
