EasyManua.ls Logo

Mercury 1000 - 10. Removing the Side Panels

Mercury 1000
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
INSTALLATION
Check the appliance is electrically safe when you have nished.
10. Removing the Side Panels
You will need the following equipment to remove the side
panels:
1. Cross-head screwdriver
2. Flat head screwdriver
3. Allen keys (provided in pack).
Removing the Bottom Panel (Plinth)
1. Open the left and right-hand oven door
2. Unscrew the two allen head screws (Fig. 10.1), lift the
bottom panel up and slightly rotate the panel away
from the pins (Fig. 10.2).
Bottom panel
Side view at the front base of the cooker
Lift
1
Rotate
2
Pin
Locating
washer
Side panel
Fig. 10.1
Fig. 10.2

Related product manuals