Mercury 125 OptiMax - Start in Gear Protection; Fuel System; Avoiding Fuel Flow Restriction; Electric Fuel Pump

OUTBOARD INSTALLATION
eng 109
6. Attach two cable ties around the grommet tube.
a - Cable tie
FLUSH HOSE ROUTING
If desired, the flush hose can be routed outside the cowling as
follows:
1. Using a needle‑nose pliers, break out the semi‑circular
knockouts in the access cover and lower cover. Smooth the
edges of the knockout with sandpaper or a small knife.
2. Route the flush hose through this opening.
a - Knockout
b - Flush hose
a
23639
a
b
23642