MAINTENANCE
44
9. Place a block of wood between gearcase and propeller and torque propeller nut to specifications.
Description Nm lb. in. lb. ft.
Propeller nut 75 55
10. Secure propeller nut by bending three of the tabs into the thrust hub grooves.
ob00422
Spark Plug Inspection And Replacement
!
WARNING
Avoid serious injury or death from fire or explosion caused by damaged spark plug boots. Damaged spark plug
boots can emit sparks. Sparks can ignite fuel vapors under the engine cowl. To avoid damaging spark plug
boots, do not use any sharp object or metal tool such as pliers, screwdriver, etc. to remove spark plug boots.
1. Remove the spark plug leads. Twist the rubber boots slightly and pull off.
ob00375
2. Remove the spark plugs to inspect. Replace spark plug if electrode is worn or the insulator is rough, cracked,
broken, blistered or fouled.
ob00423
3. Set the spark plug gap to specification.
ob00424
To Next Page
Loading...
Need help?
General
