MAINTENANCE
84
Top Cowl Removal and Installation
REMOVAL
1. Unlock the rear latch by pushing lever down.
2. Lift rear of cowl and disengage front hook.
INSTALLATION
1. Engage the front hook and push cowl back over the cowl
seal.
2. Push cowl down and move the rear latch lever up to lock.
Battery Inspection
The battery should be inspected at periodic intervals to ensure
proper engine starting capability.
IMPORTANT: Read the safety and maintenance instructions
which accompany your battery.
1. Turn off the engine before servicing the battery.
2. Make sure the battery is secure against movement.
3. Battery cable terminals should be clean, tight, and correctly
installed. Positive to positive and negative to negative.
4. Make sure the battery is equipped with a nonconductive shield
to prevent accidental shorting of battery terminals.
To Next Page
Loading...
