OUTBOARD INSTALLATION
92
2. Insert steering cable into tilt tube.
3725
3. Torque nut to specification.
3727
Description Nm lb. in. lb. ft.
Nut 47.5 35
Steering Link Rod Fasteners
IMPORTANT: The steering link rod that connects the steering
cables to the engine must be fastened using special washer head
bolt (P/N 10‑849838) and self‑locking nylon insert locknuts (P/N
11‑826709113). Never replace locknuts with common nuts
(non‑locking) as they will work loose/vibrate off freeing link rod to
disengage.
To Next Page
Loading...
