Mercury 25 Series User Manual

OPERATION
67
9. Place the control lever at Neutral (N), and move the Throttle
only lever to the open position.
37715
N
c
d
e
a
b
a - Fully opened position
b - Fully closed position
c - Throttle only lever
d - Ignition key switch
e - Lanyard stop switch
SET THE LANYARD STOP SWITCH TO RUN POSITION
Be sure to connect the lanyard stop switch to your body. The
engine will shut down if the stop lanyard is disconnected.
Tiller handle models
37465
a
b
c
a - Lanyard stop switch
b - Stop switch lock
c - Hook

Mercury 25 Series Specifications

General

Gear Ratio	2.08:1
Horsepower	25 HP
Steering	Tiller
Shaft Length	15 in, 20 in
Starting	Manual
Full Throttle RPM Range	5000- RPM
Fuel Type	Gasoline