Mercury 25 Series User Manual

OPERATION
68
Remote control models
37716
a
b
c
d
e
a - Hook
b - OFF
c - ON
d - Stop switch lock
e - Lanyard stop switch
NOTE: The engine will not start unless this switch has been
properly connected and locked beforehand. Refer to General
Information - Lanyard Stop Switch .
STARTING THE ENGINE
1. Pull the rewind starter slowly until you feel the starter engage,
then pull rapidly to crank the engine. Allow the rope to return
slowly.
37523
a
b
a - Slowly
b - Rapidly

Mercury 25 Series Specifications

General

Gear Ratio	2.08:1
Horsepower	25 HP
Steering	Tiller
Shaft Length	15 in, 20 in
Starting	Manual
Full Throttle RPM Range	5000- RPM
Fuel Type	Gasoline