Mercury 250 Jet Drive - Wiring Accessories for CAN Type Gauges

250 HP JET DRIVE INSTALLATION MANUAL
Page 13
90-10240040 DECEMBER 2003
Wiring Accessories for CAN Type Gauges
Junction Boxes
4 Way
6 Way
8 Way
878492A4
878492A6
878492A8
Junction Box
Terminator/Resistor
84-879968T_ Harness without Terminator/Resistor
6 Ft
20 Ft
30 Ft
84-879982T_ Harness with Terminator/
Resistor on Both Ends
84-879981T_ Harness with Terminator/
Resistor on One End
10 Ft
15 Ft
20 Ft
30 Ft
10 Ft
15 Ft
30 Ft
3 Ft
10 Ft
30 Ft
Junction Box
Weather Cap
* For correct placement on these terminator/resistors, refer to Wiring Installation
Guidelines preceding and Typical Installation configurations following.
**
* * All unused junction box ports must be covered using these weather caps.
859318T-1
859318T-2
84-879978T-1 System Speed Harness
3 Ft
84-880756b_ System Link Extension
Harness
20 Ft
3 Ft
*
SC1000 Series (Blue Cable)
SC100 Series
84-879979T-1 System Monitor and
Tachometer Harness