Mercury 250 Jet Drive - Installation of Flushing Kit; Attach flush hose to fitting; Attach flush hose to flush adapter

250 HP JET DRIVE INSTALLATION MANUAL
Page 36
90-10240040 DECEMBER 2003
Installation of Flushing Kit
1. Attach flush hose to fitting in drive housing cover. Secure with hose clamp.
IMPORTANT: Failure to secure flush hose to fittings, will allow water to fill boat.
b
a
a-Flush Hose
b-Hose Clamp
2. Attach flush hose to flush adapter. Secure with clamp as shown.
c
a
b
a-Flush Hose
b-Flush Adaptor
c-Hose Clamp