Mercury 4.3 TKS series User Manual

Section 4 - Maintenance
Page 44 90-8M0113857 eng DECEMBER 2015
1.
If the steering cable has grease fittings: Turn the steering wheel until the steering cable is fully retracted into the cable
housing. Apply approximately three pumps of grease from a typical hand‑operated grease gun.
a - Steering cable grease fitting
Tube Ref No. Description Where Used Part No.
Extreme Grease Steering cable grease fitting 8M0071842
2. Turn the steering wheel until the steering cable is fully extended. Lightly lubricate the exposed part of the cable.
a - Extended steering cable
Tube Ref No. Description Where Used Part No.
Extreme Grease Steering cable 8M0071842
3. Lubricate the steering pin.
a - Steering pin
Tube Ref No. Description Where Used Part No.
139
Mercury 25W-40 Synthetic Blend
4-Stroke Engine Oil
Steering pin 92-8M0078629
4. On dual engine boats: Lubricate the tie bar pivot points.
6221
a
a
6222
mc71904-1
a

Mercury 4.3 TKS series Specifications

General

Brand	Mercury
Model	4.3 TKS series
Category	Engine
Language	English