OPERATION
62 eng
• Cold engine ‑ Move to the START position.
• Warm engine ‑ Move to the RE‑START position.
a - Warm engine start
b - Cold engine start
8. If engine is cold, completely pull out the choke. Push in the
choke halfway as the engine is warming up. Push in
completely after engine is warmed up.
a - Choke
NOTE: Starting flooded engine ‑ Push in the choke knob. Wait
30 seconds, then continue to crank engine for starting.
9. Pull the starter rope slowly until you feel the starter engage,
then pull rapidly to crank the engine. Allow rope to return
slowly. Repeat until engine starts.
a - Starter rope
To Next Page
Loading...
Need help?
General