STORAGE
84 eng
Tube
Ref No.
Description Where Used Part No.
120
Corrosion
Guard
External metal surfaces 92-802878 55
Protecting Internal Engine Components
• Remove the spark plug and inject a small amount of engine
oil inside the cylinder.
• Rotate the flywheel manually several times to distribute the
oil in the cylinder. Reinstall spark plug.
• Change the engine oil.
Gearcase
• Drain and refill the gearcase lubricant (refer to Gearcase
Lubrication).
Positioning Outboard for Storage
NOTICE
Storing the outboard in a tilted position can damage the
outboard. Water trapped in the cooling passages or rain water
collected in the propeller exhaust outlet in the gearcase can
freeze. Store the outboard in the full down position.
1. Carry, transport, or store the outboard only in the following
two positions. These positions will prevent oil from draining
out of the crankcase.
a - Upright
b - Tiller side down
To Next Page
Loading...
Need help?
General