3. Ensure that the lever on top of the air pump is flush with the handle
(horizontal).
4. Install the air pump on the air connection.
5. Pull the lever on the air pump (vertical) to seal the pump to the air
connection.
6. Pump air into the system until both green indicators extend and water
drains from both sides of the engine. The port side will begin draining
before the starboard side.
a - Manual release valve
b - Air pump lever
(locked)
c - Air pump
d - Air connection
e - Green indicators
extended
COLD WEATHER OR EXTENDED STORAGE
94 eng
To Next Page
Loading...
