Need help?Do you have a question about the Mercury Vessel View 4 and is the answer not in the manual?
General| Brand | Mercury |
|---|---|
| Model | Vessel View 4 |
| Category | Boating Equipment |
| Language | English |
Details the functions of the VesselView 4's physical buttons, including PAGES, LEFT, RIGHT, and ENTER.
Instructions on downloading the latest software version from Mercury's website.
Steps and considerations for updating the VesselView software via micro SD card.
Optional installation guide for the ambient air temperature sensor.
Guidelines for cleaning the display screen and media port using appropriate methods.
Troubleshooting tips for stuck buttons on the VesselView unit.
Describes the initial Mercury startup splash screen displayed when the ignition is turned on.
Guides users through the initial configuration steps for the VesselView.
Procedure to import an existing vessel configuration using a micro SD card.
Configuration steps for engine type, model, joystick, and number of engines.
Allows selection of engines to display and assigns unique IDs/helm locations.
Selects units of measure and assigns type, capacity, and name for vessel tanks.
Configures the source for acquiring vessel speed information (GPS, pitot, paddle wheel).
Finishes setup, sets up detectable data sources, and explains startup screens.
Details screens for Engine Off, Ignition On, and Engine Running at Idle states.
Explains fault display, fault text, and how to navigate through detected engine faults.
Describes maintenance reminders and the system scan report display.
Explains how communication errors are displayed, with dashed lines and error messages.
Explains the purpose and display of the system status field and its icons.
How to enlarge data fields by highlighting the X-PAND icon and pressing ENTER.
Details the auto cycle function, its icon, and how to activate/deactivate it.
Explains scroller bar functionality, activation, and navigation.
How the user-selected data area changes during navigation and after selection.
Lists and describes icons for X-Pand, Temperatures, Pressure, Voltages, Fuel, Tanks, Advanced.
Describes scroller bar icons for Performance, Trim, Trip Log, Navigation, Generator, ECO, Autopilot.
Describes scroller bar icons for Cruise, Troll, Smart Tow, and Settings.
Details Economy Mode and ECO Mode, including minimum/maximum values and RPM targets.
Defines target colors and explains ECO navigation controls (Refresh, Minimize, Exit).
Explains ECO Refresh and the Minimize feature for displaying additional information.
Exits ECO mode and details how to adjust ECO targets for fuel economy.
Introduces Smart Tow mode and its features for managing boat acceleration and speeds.
Steps to enable Smart Tow and description of Smart Tow targets (RPM, overshoot).
Explains the Smart Tow overview panel and the user-selected data area functionality.
Navigates Smart Tow settings and explains save options (quick save, save as new).
Allows custom launch profile creation and explains how to disable Smart Tow.
Introduces Cruise Control, its data area, and constant field changes.
Explains cruise navigation, status, and display options (enable/disable).
Details the effects of enabling or disabling the cruise feature.
Explains cruise minimize and introduces Troll Control Mode for low-speed engine management.
Details Troll Control, its data area, and constant field changes.
Explains Troll user-selected data area, troll navigation, and status.
Details the effects of enabling or disabling the troll feature.
Explains troll minimize and introduces Autopilot Screens for autopilot/joystick operations.
Explains autopilot screen navigation and how to minimize autopilot data.
Guide to navigating the Settings menu using the pages and arrow buttons.
Covers settings for language, software version, helm/device ID, and setup wizard.
Details Setup Wizard, Restore Defaults, and Network settings for configuration and diagnostics.
Explains Simulate mode for familiarization and Time settings for clock and date.
Covers vessel settings like tabs, tanks, speed, steering, sea temp, and depth offset.
Details tank calibration and speed source configuration.
Covers steering, sea temperature source, and depth offset settings.
Details engine settings for engines shown, model, limits, supported data, ECO, and Cruise/SmartTow types.
Covers trim settings, EasyLink gauge connections, and RPM synchronization.
Details tank setup and preferences like buzzer, backlight, scroller bar, data boxes, pop-ups, units.
Covers auto-hide delay, scroller bar items, pop-ups, auto-cycle interval, and units.
Explains network updates, local gain adjustment, and scroller bar item visibility.
Details data boxes, pop-up selection, and auto-cycle interval settings.
Covers unit selection and alarm settings, history, and display options.
Covers exporting, importing, and restoring vessel personalities for settings.
Explains how to export VesselView settings and preferences to an SD card.
Details importing personality files from SD card and restoring OEM settings.
Provides an overview of warnings, faults, and alarms displayed by VesselView.
Manages fuel alarms through Settings, displays warnings in data field or status field.
Manages depth alarms through Settings, displays warnings in data field or status field.
To Next Page
