Mercury Vessel View 4 - Simulate and Time Settings; Vessel, Tabs, and Tanks Settings

Section 4 - Setup and Calibrations
90-8M0120668 eng MARCH 2016 Page 47
Language
Select the language that will be displayed on VesselView.
1.
With the settings icon highlighted, press the ENTER button. The Settings menu screen will appear.
56791
2.
Press the ENTER button to access the flyout menu of System options and select Language.
56825
About
View the current software version of VesselView.
Helm 1, Device 1
Set the unique identity of VesselView. This is critical on boats with multiple helms or multiple VesselViews, to ensure proper
data transmission over the network.
Setup Wizard
A convenient and easy to use configuration tool. Setup wizard guides you through the required vessel information selections,
which determine the features and options available to the operator.
• Import configuration from a micro SD card
• Engine setup
• Select engine type
• Select engine model
• Vessel has a joystick, yes/no
• Select number of engines
• Display setup selects which engines will be displayed by VesselView
• Device setup assigns the identification and location of the VesselView
• Units setup selects the units of measure that will be displayed, metric or US standard. Units of measure can be customized
at any time using the Preferences menu.