Mercury Vessel View 4 User Manual

Section 4 - Setup and Calibrations
Page 56 90-8M0120668 eng MARCH 2016
Tanks
During tank setup, information was entered that defined the location, name, and capacity of individual tanks. Link gauge
settings allow the operator to select which link harness will transmit data from the tank tab selected. Tank tabs with an
arrowhead indicate that tank was defined during tank setup in the Vessel Settings menu, and can be assigned an EasyLink
location.
Preferences
56815
56820
The Preferences menu allows the operator to set beep levels, change backlighting settings, activate scroller bar items,
populate data boxes, customize pop‑up screens, and choose units of measure.
The greater than sign (>) indicates additional menu choices.
Preferences
Buzzer >
Key beeps—Off, Quiet, Normal, or Loud —
Alarm beeps—On—dot, off—no dot —
Backlight >
Level > Select 0%—100%
Night mode > On—dot, Off—no dot
Network update > On—dot, Off—no dot
Local gain > Input 0%—100%

Mercury Vessel View 4 Specifications

General

Brand	Mercury
Model	Vessel View 4
Category	Boating Equipment
Language	English