Mercury Vessel View 4 - Speed Setup; Wizard Completion and Data Sources

Section 2 - Initial Screens and Setup Wizard
Page 12 90-8M0120668 eng MARCH 2016
Display Setup
Depending on the number of engines indicated in the Engine Setup screen, select the engines to be displayed by this
VesselView unit. Up to two engines can be selected.
60116
Device Setup
In the Device Setup screen, use the RIGHT and LEFT arrow buttons to highlight the drop‑down menus. If using multiple
VesselView devices, be sure to assign unique numbers to each unit, to avoid data problems. Helm numbers should match the
location of the individual VesselView unit. Highlight Next and press ENTER to continue.
a - VesselView device number
b - Helm location number
a
b
56802