Section 2 - Initial Screens and Setup Wizard
90-8M0120668 eng MARCH 2016 Page 15
Select the OK button using the arrow buttons and the ENTER button. This will bring the operator back to the tanks selection
screen to complete the configuration of an additional tank.
Repeat the process to assign tank type, capacity, and tank name for the remaining tanks on the vessel. When complete, select
the Next button to continue with the Setup wizard.
Speed Setup
In the Speed Setup screen, there are three options for determining how VesselView will acquire speed information. If the
vessel is equipped with a GPS, the drop‑down menu will allow selection of available devices. If the vessel is equipped with a
pitot sensor, this option will be selected. If the vessel is equipped with a paddle wheel, then an option to select will drop down.
After the speed source has been selected, highlight Next and press ENTER to continue.
a - Options for speed data
To Next Page
Loading...
