Section 2 - Initial Screens and Setup Wizard
90-8M0120668 eng MARCH 2016 Page 13
Units Setup
Select the units of measure that VesselView will display on‑screen data; speed, distance, and volumes. Individual units of
measure can be changed later. After selecting the units of measure, highlight Next and press ENTER.
Tank Configuration
In the Tank Setup screen, tank type, capacity, and tank name can be assigned for up to eight tanks. The % column will display
the live tank volume. Selecting the Refresh button will query the tank sensors and refresh the readings.
The unmonitored tank is a tank that does not have a sensor associated with it.
To Next Page
Loading...
