Mercury Vessel View 4 - Trim, EasyLink, and RPM Sync; Tanks and Preferences Overview

Section 4 - Setup and Calibrations
Page 52 90-8M0120668 eng MARCH 2016
56818
Engines allows the setting of the engine type and model. Engine limits can be set using minimum and maximum values for
operating parameters. Selection of supported data items can be turned on or off from this menu. ECO, Cruise, Smart Tow, and
trim settings are adjusted through the Engines menu Settings.
The greater than sign (>) indicates additional menu choices.
Engines
Engines shown > Select >
Port, dot—yes, empty—no
Starboard, dot—yes, empty
—no
Engine model > Select
Limits >
RPM >
Min, Max, and Warnings
Options >
Reset, Save, or Cancel
Fuel Rate > STBD or PORT >
Min, Max, and Warnings
Options >
Reset, Save, or Cancel
Coolant Temp >
Min, Max, and Warnings
Options >
Oil Temp >
Min, Max, and Warnings
Options >
Reset, Save, or Cancel
Oil Pressure >
Min, Max, and Warnings
Options >
Reset, Save, or Cancel
Water Pressure >
Min, Max, and Warnings
Options >
Reset, Save, or Cancel
Battery Voltage >
Min, Max, and Warnings
Options >
Reset, Save, or Cancel
Intake Temp > STBD or PORT >
Min, Max, and Warnings
Options >
Reset, Save, or Cancel
Boost Pressure > STBD or PORT >
Min, Max, and Warnings
Options >
Reset, Save, or Cancel
Trans Oil Pressure > STBD or PORT >
Min, Max, and Warnings
Options >
Reset, Save, or Cancel
Trans Oil
Temperature >
STBD or PORT >
Min, Max, and Warnings
Options >
Reset, Save, or Cancel