1. Loosen main jet plugs with 1 turn on side of carburetors to drain fuel.
3807
2. Dispose of fuel properly.
FUEL LINE INSPECTION
Visually inspect the fuel line and primer bulb for cracks, swelling, leaks,
hardness, or other signs of deterioration or damage. If any of these conditions
are found, the fuel line or primer bulb must be replaced.
CARBURETOR ADJUSTMENTS
Slow Speed Mixture Adjustment
1. Before starting engine, turn the slow speed mixture screw in until it is
lightly seated then back it out 1‑1/4 turns.
3912
2. With boat tied securely to dock, start engine and allow it to warm up.
3. Shift the outboard into forward gear while maintaining idle speed.
4. Turn the slow speed mixture screw slowly in until the engine starts to
misfire or stall due to a lean mixture. Note the position of the screw slot.
MAINTENANCE
54 eng
To Next Page
Loading...
Need help?
General
