FEATURES AND CONTROLS
37
Power Tilt (if equipped)
This outboard has a tilt control called power tilt. This enables the operator to easily adjust the position of the
outboard by pressing the tilt switch. With the engine turned off, the outboard can be tilted out of the water. At low
idle speed, the outboard can also be tilted up to permit shallow water operation.
4649
TILTING OPERATION
To tilt outboard, shut off the engine and press the tilt switch to the up position. The outboard will tilt up until the
switch is released or it reaches its maximum tilt position. Tiller handle models have a kicker strap located on each
side of the outboard, preventing the outboard from turning when tilted up.
To Next Page
Loading...
