MAINTENANCE
59
ob00490
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion Grease Propeller shaft 92-802867Q1
95
2-4-C with Teflon Propeller shaft 92-802859Q1
7. Install front thrust washer, propeller, rear thrust hub, and propeller nut onto the shaft.
8. Place a block of wood between gearcase and propeller to prevent rotation and tighten propeller nut. Secure
propeller nut to the shaft with cotter pin.
a
b
c
d
e
ob00489
a - Cotter pin
b - Propeller nut
c - Rear thrust washer
d - Propeller
e - Front thrust washer
Fuse Replacement ‑ Electric Start Models
IMPORTANT: Always carry spare 20 AMP fuses.
The electric starting circuit is protected from overload by a 20 AMP fuse. If the fuse is blown try to locate and correct
the cause of the overload. If the cause is not found, the fuse may blow again.
To Next Page
Loading...
