Do you have a question about the Mercury 8.0 and is the answer not in the manual?
Starting | Manual |
---|---|
Engine Type | 2-Cylinder |
Full Throttle RPM Range | 5000-6000 RPM |
Steering | Tiller |
Gear Ratio | 2.08:1 |
Horsepower | 8 hp (5.9 kW) |
Shaft Length | 15 in |
Verify your engine is properly registered for warranty purposes online.
Details the process and importance of registering your product for warranty.
Details specific exclusions from warranty coverage, including labor and incidental damages.
Covers product rendered inoperative due to corrosion.
Details requirements for corrosion warranty, including device use and maintenance.
Mercury's obligations for repairing or replacing corroded parts or refunding the price.
Explains the process for submitting warranty claims and dealer responsibilities.
Highlights operator's duty for safe operation and understanding the manual.
Symptoms and dangers of carbon monoxide poisoning from engine exhaust.
Instructions for mounting and installing the outboard onto the boat transom.
Proper procedures for transporting the outboard after removal from the boat.
Procedure for checking engine oil level and inspecting for contamination.
A checklist of essential items to verify before starting the engine.
Detailed procedure for breaking in a new outboard engine.
Step-by-step guide to starting the engine using tiller handle controls.
Step-by-step guide to starting the engine using remote control systems.
Methods for starting the engine in an emergency using a spare starter rope.
Procedure for flushing cooling passages after use in salt or polluted water.
Procedure for flushing cooling passages on Bigfoot models.
Steps for removing and installing propellers on standard models.
Steps for removing and installing propellers on Bigfoot models.
Procedure for inspecting, cleaning, and replacing spark plugs.
Procedure for changing the engine oil and its capacity.
Procedure for checking and refilling gear case lubricant, including capacity.
Advice on immediate service required for an outboard submerged in water.
Procedures for preparing the outboard for seasonal or prolonged storage.
Troubleshooting steps for electric start models when the starter motor does not crank.
Common causes and solutions for an engine that fails to start.
Troubleshooting steps for an engine that runs unevenly or inconsistently.
Possible causes and solutions for reduced engine performance.