Need help?Do you have a question about the Mercury 9.9 Command Thrust and is the answer not in the manual?
General| Horsepower | 9.9 HP |
|---|---|
| Starting System | Electric |
| Shaft Length | 20" |
| Cylinders | 2 |
| Full Throttle RPM | 5000-6000 |
| Steering | Tiller |
| Warranty | 3 years |
| Fuel Type | Gasoline |
| Engine Type | 4-Stroke |
| Alternator Output | 6 Amps |
Outlines operator duties, safe practices, and general operating guidelines for the outboard.
Explains the function and importance of the lanyard stop switch for engine safety.
Provides detailed technical specifications and capacity limits for the engine.
Details the functions and operation of the tiller handle, including throttle, choke, and steering.
Explains the functions of the remote control handle, trim/tilt switches, and safety features.
Describes the operation of the power tilt system for adjusting outboard position.
Lists essential checks and steps to perform before starting the engine.
Provides detailed instructions for starting the engine using tiller handle or remote controls.
Explains how to shift gears and properly stop the engine.
Outlines recommended maintenance tasks based on usage intervals (hours/years).
Details procedures for flushing the cooling system and inspecting the fuel system.
Details procedures for inspecting/replacing spark plugs and servicing the gearcase lubricant.
Explains what is covered and not covered by the limited warranty.
Details EPA and California emissions-related warranty coverage and components.
Provides warranty duration details for different regions and product types.
Covers engine capacity limits and required transom height for safe installation.
Instructions on how to properly mount and secure the outboard to the boat transom.
Guides for installing steering cables and throttle/shift control cables.
To Next Page
