0
90-10122R30
GB
EUROPEAN COMMUNITY DECLARATION OF CONFORMITY
Issued in accordance with the
MARINE EQUIPMENT DIRECTIVE (MED) 96/98/EC
AND AMENDING DIRECTIVE 98/85/EC
This is to certify that, in compliance with the Council Directive 96/98/EC of December 20
th
, 1996 and
amending Directive 98/85/EC of November 11
th
, 1998 on marine equipment :
MARINE POWER EUROPE, Inc.
Parc Industriel de Petit–Rechain
B–4800 VERVIERS
BELGIEN
Declares that the product detailed below has been manufactured in accordance with the requirements of
Annex B, Module D, ” Production Quality Assurance” system as approved by Lloyd’s Register (Notified
Body n5 0038) to conform to type as described in the following EC Type Examination Certificate as issued
by Lloyd’s Register (Notified Body n5 0038) in accordance with Annex B, Module B. In addition, the product
detailed below bears the conformity mark (ship’s wheel mark) on the transom bracket.
Certificate N_: MED0050422 MED0050425
Issued November 17, 2000 Issued November 17, 2000
Product Reference: MERCURY 60 MARINER 60
(all versions) (all versions)
Product description: Rescue Boat Propulsion Engine
J. BRONCHART
General Manager
IMPORTANT NOTICE :
In accordance with the above–mentioned certificate :
1 Each engine shall be fitted with the manufacturer’s recommended propeller, which when fitted to a
rescue boat, shall also be fitted with a guard.
THE PROPELLER MAY NOT BE SUPPLIED AS FACTORY STANDARD EQUIPMENT.
THE PROPELLER GUARD IS NOT SUPPLIED AS FACTORY STANDARD EQUIPMENT.
2 When supplied for use on Fast Rescue Boats on Ro–ro Passenger ships to which IMO
MSC/Circ.809 Annex applies, for compliance with Annex paragraph 4.1.8. the engine is to be
equipped with the facilities necessary to enable it to be re–started following a capsize.
THESE FACILITIES ARE NOT SUPPLIED AS FACTORY STANDARD EQUIPMENT.