113
CA817
Propellers
Bravo One and Two
WARNING
Avoid Injury: Remote Control must be in NEUTRAL and igni-
tion key removed from switch before removing and/or install-
ing propeller.
WARNING
Avoid Injury: Place a block of wood between anti-ventilation
plate and propeller to protect hands from propeller blades and
to prevent propeller from rotating when removing propeller
nut.
CAUTION
Avoid Injury: Periodically check propeller nut for tightness
during boating season. A minimum of 55 lbs. ft. (75 N
⋅m)
torque is required.
CA743
REMOVAL
1 Place wood block between propeller blade and anti-ventilation
plate to prevent rotation. Straighten bent tabs on tab washer.
2 Turn propeller shaft nut counterclockwise to remove nut.
3 Slide tab washer, spline washer, propeller and thrust hub off pro-
peller shaft.
CA79
REPAIR
Some damaged propellers can be repaired. See your dealer.
To Next Page
Loading...
