EasyManua.ls Logo

Mercury Alpha

Mercury Alpha
181 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
78
CA954
Engine Specifications
(V-6 Models)
Models 4.3L 4.3LH 4.3L EFI
Propshaft Horsepower
(SAV1 Rating)
190
1
205
1
(190
2
)
210
1
(188
2
)
Propshaft Kilowatts
(SAV1 Rating)
142
1
153
1
(142
2
)
157
1
(140
2
)
Displacement 262 cid (4.3 l)
Maximum rpm @ WOT
3
4400-4800 rpm
Idle rpm in NEUTRAL 650 rpm
5
600 rpm
6
Oil Pressure @ 2000 rpm 30-70 psi (207-483 kPa)
Min. Oil Pressure @ Idle 4 psi (28 kPa)
Thermostat 160° F (71° C)
Timing @ Idle rpm
4
10 ° BTDC 8° BTDC
Firing Order 1-6-5-4-3-2
Electrical System 12-Volt Negative () Ground
Alternator Rating - Hot
Operating Amps
65 Amps
Alternator Rating - Cold
Operating Amps
72 Amps
Recommended Battery
Rating (Minimum)
375 cca /
475 mca/ 90 Ah
550 cca/
700 mca/120 Ah
1
Power Rated in Accordance with NMMA (National Marine Manufacturers Associa-
tion) rating procedures.
2
Power Rated in Accordance with SAV 1 rating procedures. Horsepower differ-
ences shown result from differences in test rpm, allowable test tolerances, and/or
installation of special kit components.
3
Measured using an accurate service tachometer with engine at normal operating
temperature.
4
A special procedure must be followed to check or adjust timing. Consult your
Authorized Mercury MerCruiser Dealer before attempting this procedure.
5
A special procedure must be followed to adjust idle rpm. Consult your Authorized
Mercury MerCruiser Dealer before attempting this procedure.
6
Idle speed on EFI models is not adjustable.

Table of Contents

Other manuals for Mercury Alpha

Related product manuals