119
4 Install propeller nut. Tighten nut securely. A minimum of 100 lbs.
ft. (136 N·m) torque is required. Check propeller at least after 20
hours of operation. Do not operate with loose propeller.
5 Slide aft thrust hub onto propeller shaft, with tapered side toward
propeller hub (toward end of shaft).
6 Align splines and place propeller on propeller shaft.
7 Install propeller nut. Tighten nut securely. A minimum of 60 lbs. ft.
(81 N·m) torque is required. Check propeller at least after 20 hours
of operation. Do not operate with loose propeller.
To Next Page
Loading...
