EasyManuals Logo

Mercury Big Tiller User Manual

Mercury Big Tiller
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
4. Shift outboard to neutral ("N") position.
5. Rotate the throttle grip clockwise to the "START/SHIFT" position.
6. Starting a flooded engine ‑ Advance the throttle grip to half throttle
position.
a - Start/Shift
NOTE: For initial start of a new engine, or for an engine that ran out of fuel or
was drained of fuel, the fuel system should be filled by following the procedure
in the
Starting the Outboard
section of the outboard owner's manual.
7. Non‑DTS models ‑ Turn the ignition key to the "START" position. If the
engine fails to start within ten seconds, return the key to the "ON"
position, wait 30 seconds, and try again.
65328
a
OPERATION
14 eng

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury Big Tiller and is the answer not in the manual?

Mercury Big Tiller Specifications

General IconGeneral
BrandMercury
ModelBig Tiller
CategoryBoating Equipment
LanguageEnglish

Related product manuals