The coolant level should be at the full mark on the coolant reservoir with the
engine cold.
FILLING THE CLOSED COOLING SYSTEM
IMPORTANT: The engine must be cooled to ambient temperature to correctly
perform the following procedure.
NOTICE
Using propylene glycol antifreeze in the closed cooling system can damage
the cooling system or the engine. Fill the closed cooling system with an
ethylene glycol antifreeze solution suitable to the lowest temperature to which
the engine will be exposed.
The coolant section of the closed cooling system must be filled with a 50/50
mixture of Extended Life Antifreeze/Coolant and distilled water.
Tube Ref
No.
Description Where Used Part No.
122
Extended Life
Antifreeze/Coolant
Closed cooling system 92-877770K1
NOTE: Coolant section capacity is approximate.
MAINTENANCE
eng 57
To Next Page
Loading...
