75
CA77
Propeller
!
WARNING
Remote Control must be in NEUTRAL and ignition key removed
from switch before removing and/or installing propeller.
!
WARNING
Place a block of wood between anti-ventilation plate and propel-
ler to protect hands from propeller blades and to prevent pro-
peller from rotating when removing propeller nut.
!
CAUTION
Periodically check propeller nut for tightness during boating
season. A minimum of 55 lbs. ft. (75 N⋅m) torque is required.
CB157
REMOVAL (BRAVO THREE)
1 Place wood block between propeller blades and anti-ventilation
plate to prevent rotation.
2 Turn aft propeller shaft nut counterclockwise to remove nut.
3 Slide propeller and thrust hub off propeller shaft.
4 Turn front propeller shaft nut counterclockwise to remove nut.
5 Slide propeller and thrust hub off propeller shaft.
CA79
REPAIR
Some damaged propellers can be repaired. See your dealer.
To Next Page
Loading...
Need help?
General