EasyManua.ls Logo

Mercury jet 20 - Top Cowl Removal and Installation; Battery Inspection

Mercury jet 20
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
69
oh
MAINTENANCE
goh43
1
2
ohf2
Top Cowl Removal And Installation
REMOVAL
1 Unlock the rear latch by pushing lever down.
2 Lift rear of cowl and disengage front hook.
INSTALLATION
Engage the front hook and push cowl back over the cowl seal.
Push cowl down and move the rear latch lever up to lock.
ohn1
Battery Inspection
The battery should be inspected at periodic intervals to ensure proper engine
starting capability.
IMPORTANT: Read the safety and maintenance instructions which
accompany your battery.
1. Turn off the engine before servicing the battery.
2. Add water as necessary to keep the battery full.
3. Make sure the battery is secure against movement.
4. Battery cable terminals should be clean, tight, and correctly installed. Positive
to positive and negative to negative.
5. Make sure the battery is equipped with a nonconductive shield to prevent
accidental shorting of battery terminals.

Table of Contents

Related product manuals