59
of
OPERATION
gof108
123
4
off6
Starting The Engine – Tiller Handle Models
Before starting, read the Pre-Starting Check List, Special Operating Instructions,
Pre-Starting Instructions, and Engine Break-in Procedure on the first three pages in
the Operation Section.
1 Open fuel tank vent on manual venting type tanks.
2 Squeeze the fuel line primer bulb several times until it feels firm.
3 Set the lanyard stop switch to RUN position.
4 Set the throttle grip to start position.
IMPORTANT: Electric starting outboards must not be run or started (either
manually or electrically), without having the outboard battery cables
connected to a battery, as damage to the charging system could result.
To Next Page
Loading...
