85
oh
MAINTENANCE
goh136
8-10
ohu3
ENGINE IDLE SPEED ADJUSTMENT
8 With boat tied securely to dock, start engine and allow it to warm up.
9 Shift outboard to forward gear and reduce engine speed to idle. Make sure the
Primer/Fast Idle Knob is pushed all the way in and turned to the slowest idle
speed.
10 Adjust the idle speed screw to obtain the recommended engine idle speed.
(Refer to Specification Chart in General Information Section.)
HIGH SPEED MIXTURE ADJUSTMENT
The carburetor is equipped with a standard size high speed fixed jet that is
replaceable for operation at higher elevations.
ohr1
Submerged Outboard
A submerged outboard will require service within a few hours by an authorized dealer
once the outboard is recovered from the water. This immediate attention by a
servicing dealer is necessary once the engine is exposed to the atmosphere to
minimize internal corrosion damage to the engine.
To Next Page
Loading...
