MAINTENANCE
70
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft
92-802867Q
1
95
2-4-C with Teflon Propeller shaft 92-802859A1
NOTE: The Flo‑Torq lll propeller drive hubs are designed to have
a small amount of free play when installed. This free play allows
the propeller to slide back and forth on the rear thrust hub [up to
3.17 mm (1/8 in.)] and rotate up to 10 degrees.
2. Flo‑Torq III Drive Hub Propellers ‑ Install the forward thrust
hub, replaceable drive sleeve, propeller, thrust hub, propeller
nut retainer, and propeller nut onto the shaft.
a - Propeller nut
b - Propeller nut retainer
c - Rear thrust hub
d - Propeller
e - Replaceable drive
sleeve
f - Forward thrust hub
3. Place a block of wood between the gearcase and propeller.
Torque the propeller nut to specification.
Description Nm lb. in. lb. ft.
Propeller nut 75 55
4. Secure the propeller nut by bending three of the tabs into the
thrust hub grooves.
To Next Page
Loading...
Need help?
General
