MAINTENANCE
73
1. Inspect the alternator belt and have it replaced by an
authorized dealer if any of the following conditions are found.
a. Cracks or deterioration in the rubber portion of the belt.
b. Belt surfaces rough or uneven.
c. Signs of wear on edges or outer surfaces of belt.
Lubrication Points
1. Lubricate the following with Quicksilver or Mercury Precision
Lubricants Anti‑Corrosion Grease or 2‑4‑C with Teflon.
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft
92-802867Q
1
95
2-4-C with Teflon Propeller shaft 92-802859A1
• Propeller Shaft ‑ Refer to Propeller Replacement for
removal and installation of the propeller. Coat the entire
propeller shaft with lubricant to prevent the propeller hub
from corroding and seizing to the shaft.
2. Lubricate the following with Quicksilver or Mercury Precision
Lubricants 2‑4‑C with Teflon or Special Lubricant 101.
To Next Page
Loading...
