MAINTENANCE
60
3. Place lubricant tube into the fill hole and add lubricant until it appears
at the vent hole.
ob00498
a
b
c
a - Vent plug
b - Lubricant at vent hole
c - Fill/drain plug
IMPORTANT: Replace sealing washers if damaged.
4. Stop adding lubricant. Install the vent plug and sealing washer before
removing the lubricant tube.
5. Remove lubricant tube and reinstall cleaned fill/drain plug and sealing
washer.
Submerged Outboard
A submerged outboard will require service within a few hours by an
authorized dealer once the outboard is recovered from the water. This
immediate attention by a servicing dealer is necessary once the engine is
exposed to the atmosphere to minimize internal corrosion damage to the
engine.
To Previous Page
Loading...
