Mercury OUTBOARD MOTOR - Engine Cowl Service; Top Cowl Removal Procedure; Top Cowl Installation Procedure

MAINTENANCE
50
3. Remove the thread‑in hose coupling and reinstall plug and gasket.
a
b
ob00484
a - Gasket b - Thread‑in hose coupling
Top Cowl Removal And Installation
REMOVAL
1. Unlock the rear latch by pushing lever down.
ob00485
2. Lift rear of cowl and disengage front hook.
ob00486
INSTALLATION
1. Engage the front hook and push cowl back over the cowl seal.
2. Push cowl down and move the rear latch lever up to lock.