28
Motherboard User’s Guide
LAN/Ring Power On
The system can be turned off with a software command. If you
enable this item, the system can automatically resume if there is
an incoming call on the Modem/Ring, or traffic on the network
adapter. You must use an ATX power supply in order to use this
feature.
Keyboard Power On/Wake-Up key/Wake-Up Password
If you enable this item, system can automatically resume by
pressing any keys, hot or power key on the keyboard or typing in
the password. You must enable the Keyboard Power On jumper
and use an ATX power supply in order to use this feature.
PowerOn by RTC Alarm / Date / Hour / Minute / Second
The system can be turned off with a software command. If you
enable this item, the system can automatically resume at a fixed
time based on the system’s RTC (realtime clock). Use the items
below this one to set the date and time of the wake-up alarm. You
must use an ATX power supply in order to use this feature.
To Next Page
Loading...
