1. Press "+" or "-" to bring up the cruise control display screen.
2. Push the "SELECT" button to highlight "SET LAUNCH".
3. Push "+" to raise the setting and push "-" to lower the setting.
4. Launch control will automatically turn on with the cruise
control.
If the cruise control is engaged and none of the numerical launch
control settings are selected, ("CRUISE" is displayed) launch
acceleration is controlled by the throttle up to the RPM set point.
The display screen will revert back to the "RPM SET" screen after
5 seconds of inactivity. Push the "+" or "-" buttons to reactivate the
cruise control display screen.
CANCELING LAUNCH CONTROL
The launch control will turn off when the cruise control is turned off.
To Next Page
Loading...
Need help?
General
