9.
NOTE:Networks that do not require a password are acceptable to use. Captive portal Wi‑Fi networks, which require a
user to interact with a web page, cannot be used to configure this module.
NOTE:The device name uses the last 3 digits of the module serial number for identification.
NOTE:Wi‑Fi signal strength needs to be 3 bars to function properly.
10.
Enter the network password and select Connect.
SCC-1 SMARTCRAFT CONNECT GATEWAY INSTALLATION MANUAL
Page12 / 23 © 2023 Mercury Marine 90-8M0219240 eng MAY2023
To Next Page
Loading...
Need help?
General
