EasyManuals Logo

Mercury SKI User Manual

Mercury SKI
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
33
CC516
SCHEDULED MAINTENANCE THAT SHOULD BE PERFORMED
BY A DEALER
NOTE: Only perform maintenance which applies to your particular power package.
Task Interval
Seawater Pickup Pump - Disassemble and Inspect. Whenever Insufficient Seawater Flow is Suspected
(if operating temperature exceeds normal range.)
Transmission Fluid - change.
Ed ffi b i dh f
Crankcase Oil and Oil Filter - change.
Ed ffi b i dh f
Ignition System - clean and inspect condition.
Ed ffi b i dh f
Flame Arrestor and Crankcase Ventilation Valve -
clean and inspect.
Ed ffi b i dh f
Engine Alignment - check.
Ed ffi b i dh f
Replace Positive Crankcase Ventilation Valve (if so
equipped).
Ed ffi b i dh f
In-Fuel Filter (Mounted on starboard side of Plenum)
Ed ffi b i dh f
Electrical system - Check for loose or damaged
wiring.
End of first boating season and thereafter,
every100 hours of operation or once yearly
Cooling System hoses and clamps - for damage and
deterioration. Check clamps for tightness.
every100 hours of operation or once yearly,
whichever occurs first.
Engine Exhaust System - Inspect externally for
damage, deterioration, and restrictions. Check
clamps for tightness.
Shift and Throttle Cable and Linkage - Lubricate and
inspect for loose, damaged or missing parts
Ignition System - Check timing; adjust if needed.
Fuel Filter - replace.
Steering Head and Remote Control - Inspect and
lubricate.
Throttle Body - Inspect.

Table of Contents

Other manuals for Mercury SKI

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury SKI and is the answer not in the manual?

Mercury SKI Specifications

General IconGeneral
BrandMercury
ModelSKI
CategoryEngine
LanguageEnglish

Related product manuals